Mintu Electronics

Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb, Higher DSP capabilities: More control; has band pass filter per channel, Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues

Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power, Set sleep mode after specified time without having to press a button, Security setting disables menu buttons; menu locked/unlocked by entering combination, System reset allows factory settings to be restored

Remote power trigger, Peakx Limiters provide maximum output while protecting your speakers, XLR, 1/4", RCA inputs provide flexibility, Integrated PureBand Crossover System for better performance and control, Efficient forced-air fans prevent excessive thermal buildup

Four Fan for more efficient cooling

8 Ω stereo power 

frequency response:- 20Ηz-20KHz(+0/_0.3db)

THD+N :-

S/N Ratio :- >95db

Damping factor :- >800

Crosstalk :- >70db@8Ω 1KHz

Input Impedance :- 20kΩ( Balance)/10KΩ (Unbalance)

Output Circuitry :- Class H

Protect :- overheat short circuits, DC , Limit and softstart, Output relay-Zero Current switch, Intellctual clip limiter

Height :- 3U

QD Audio new CA series features faster reaction speed higher of damping factor and great function, higher level protection function , protection technology, special technology of SMD excellent component . 5200,1943 adopts TOSHIBA transistor to supply the high power and steady quality.
CA series have the following Advantages.
1:- This amplifier is noise free. it will increase the quality of work.
2:- It can make less distortion for a better quality sound.
3:- Integrate protect impact function of power soft -start, DC output protect function, longtime over-heat protect function and delay function. This function can protect the circuit faster when the amplifier short circuits and overloads. This will give it a steady performance for a long period of time.
4:- This series amplifier has excellent and natural timber. The adequate power gives very good control for the speaker.
5:- The unit has various input/output connectors it has three ways sensitivity switches for your level choice of stereo, bridge-mono and parallel mono.it can connect to the speaker quickly with professional Speakon.
6 crossover selector function. (only for CA 12, CA 18, CA 20 ) Turn this function ' ON' if you want to use the power amplifier with one or more subwoofer speakers.

Height 3 u

QD AUDIO Power Amplifier MT 1201
specially this amplifier for 15' top AND BASS
4 fan
2 crossover
3 u size

QD Audio Power Amplifier
MT 5500
4 FAN
2 CROSSOVEER
3 U Size

The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.

The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.

Recommended for: Portable.

• XLR balanced ins and outs
• Mode switches for mono 4-way or stereo 2-way/3-way operation
• Low frequency summed (subwoofer) output
• x10 range switch on both channels
• 40Hz high pass (low cut) filter both channels
• Phase reverse switch on all outputs
• Individual level controls on all outputs
• 24dB per octave Linkwitz-Riley filters (the professional standard)
• Stereo/Mono status LEDs indicate the selected mode
• dbx® 2 year parts and labor as standard
• CSA NRTL/C approved
• CE compliant

QSC's RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the RMX 5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability.

Like its smaller sibling (the RMX 4050HD), the RMX 5050 features a three-tier, Class H design. The RMX 5050 is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. The RMX 5050 uses the best available component upgrades to increase peak power by 25% over the RMX 4050HD.

Like all RMX amps, the RMX 5050 features balanced 1/4" TRS, XLR and barrier strip inputs, binding posts and Neutrik Speakon® outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance.

Amplifier Selector Tool
Need help choosing the right RMX Series amplifier for your speakers? Select your loudspeakers from over 200 of the most popular models to find out which amplifier will provide optimal performance.

Features:

The new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous value

The RMX 5050 provides advanced thermal performance, delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applications

Dual mono, high current power supply for increased reliability and performance

3RU chassis only 16" deep

Professional quality performance - incorporates road-proven QSC designs

High-current toroidal transformers for greater two-ohm power and low noise

Independent user-defeatable clip limiters reduce distortion

Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom

Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility

Binding post and Neutrik Speakon outputs

Front mounted gain controls for easy access

Signal and Clip LED indicators to monitor performance

four fan for more effcient cooling

8 Ω stereo power  1800 watt

frequency response 20Ηz-20KHz(+0/_0.3db)
THD+N S/N Ratio >102db
Damping factor >800
Crosstalk >70db@8Ω 1KHz
Input Impedance 20kΩ( Balance)/10KΩ (Unbalance)
Output Circuitry Class H
Protect overheat short circuits, DC , Limit and softstart,
Output relay-Zero Current switch, Intellctual clip limiter
Height 3U

Additional Information:

• Item Code: ca20
• Pay Mode Terms: Other
• Packaging Details: packing charge will be extra

four fan for more effcient cooling

8 Ω stereo power  1400 watt

frequency response 20Ηz-20KHz(+0/_0.3db)
THD+N S/N Ratio >93db
Damping factor >800
Crosstalk >70db@8Ω 1KHz
Input Impedance 20kΩ( Balance)/10KΩ (Unbalance)
Output Circuitry Class H
Protect overheat short circuits, DC , Limit and softstart,
Output relay-Zero Current switch, Intellctual clip limiter
Height 3U

Additional Information:

• Item Code: ca18
• Delivery Time: same day
• Packaging Details: packing charge will be extra

Additional Information:

• Item Code: ca40
• Packaging Details: packing charge will be extra

four fan for more effcient cooling

8 Ω stereo power  1100 watt

frequency response 20Ηz-20KHz(+0/_0.3db)
THD+N S/N Ratio >93db
Damping factor > 600
Crosstalk >70db@8Ω 1KHz
Input Impedance 20kΩ( Balance)/10KΩ (Unbalance)
Output Circuitry Class H
Protect overheat short circuits, DC , Limit and softstart,
Output relay-Zero Current switch, Intellctual clip limiter
Height 3U

Additional Information:

• Item Code: CA12
• Delivery Time: same day
• Packaging Details: packing charge will be extra

Four Fan for more efficient cooling

8 Ω stereo power 

Frequency Response :- 20Ηz-20KHz(+0/_0.3db)

THD+N :-

S/N Ratio :- >95db

Damping factor :- >800

Crosstalk :- >70db@8Ω 1KHz

Input Impedance :- 20kΩ( Balance)/10KΩ (Unbalance)

Output Circuitry :- Class H

Protect :- overheat short circuits, DC , Limit and softstart, Output relay-Zero Current switch, Intellctual clip limiter

Height :- 3U

QD Audio new CA series features faster reaction speed higher of damping factor and great function, higher level protection function , protection technology, special technology of SMD excellent component . 5200,1943 adopts TOSHIBA transistor to supply the high power and steady quality.
CA series have the following Advantages.
1:- This amplifier is noise free. it will increase the quality of work.
2:- It can make less distortion for a better quality sound.
3:- Integrate protect impact function of power soft -start, DC output protect function, longtime over-heat protect function and delay function. This function can protect the circuit faster when the amplifier short circuits and overloads. This will give it a steady performance for a long period of time.
4:- This series amplifier has excellent and natural timber. The adequate power gives very good control for the speaker. 
5:- The unit has various input/output connectors it has three ways sensitivity switches for your level choice of stereo, bridge-mono and parallel mono.it can connect to the speaker quickly with professional Speakon.
6:- crossover selector function. (only for CA 12, CA 18, CA 20 ) Turn this function ' ON' if you want to use the power amplifier with one or more subwoofer speakers.

Height 3U

Four Fan for more efficient cooling

8 Ω stereo power :- 1100 watt

frequency response :- 20Ηz-20KHz(+0/_0.3db)

THD+N :-

S/N Ratio :- >95db

Damping factor :- >600

Crosstalk :- >70db@8Ω 1KHz

Input Impedance :- 20kΩ( Balance)/10KΩ (Unbalance)

Output Circuitry :- Class H

Protect :- overheat short circuits, DC , Limit and softstart, Output relay-Zero Current switch, Intellctual clip limiter

Height :- 3U

QD Audio new CA series features faster reaction speed higher of damping factor and great function, higher level protection function , protection technology, special technology of SMD excellent component . 5200,1943 adopts TOSHIBA transistor to supply the high power and steady quality.
CA series have the following Advantages.
1:- This amplifier is noise free. it will increase the quality of work.
2:- It can make less distortion for a better quality sound.
3 Integrate protect impact function of power soft -start, DC output protect function, longtime over-heat protect function and delay function. This function can protect the circuit faster when the amplifier short circuits and overloads. This will give it a steady performance for a long period of time.
4:- This series amplifier has excellent and natural timber. The adequate power gives very good control for the speaker.
5:- The unit has various input/output connectors it has three ways sensitivity switches for your level choice of stereo, bridge-mono and parallel mono.it can connect to the speaker quickly with professional Speakon.
6 crossover selector function. (only for CA 12, CA 18, CA 20 ) Turn this function ' ON' if you want to use the power amplifier with one or more subwoofer speakers.

height 3 U

Four Fan for more efficient cooling

8 Ω stereo power  

4 Ω stereo power 

Frequency Response :- 20Ηz-20KHz(+0/_0.3db)

THD+N:-

S/N Ratio:- >94db

Damping factor :- >400

Crosstalk:- >70db@8Ω 1KHz

Input Impedance:- 20kΩ( Balance)/10KΩ (Unbalance)

Output Circuitry:- Class 2 step H

Protect:- overheat short circuits, DC , Limit and softstart, Output relay-Zero Current switch, Intellctual clip limiter

Height :- 2 U

QD Audio new CA series features faster reaction speed higher of damping factor and great function, higher level protection function , protection technology, special technology of SMD excellent component . 5200,1943 adopts TOSHIBA transistor to supply the high power and steady quality.
CA series have the following Advantages.
1:- This amplifier is noise free. it will increase the quality of work.
2:- It can make less distortion for a better quality sound.
3:- Integrate protect impact function of power soft -start, DC output protect function, longtime over-heat protect function and delay function. This function can protect the circuit faster when the amplifier short circuits and overloads. This will give it a steady performance for a long period of time.
4:- This series amplifier has excellent and natural timber. The adequate power gives very good control for the speaker. 
5:- The unit has various input/output connectors it has three ways sensitivity switches for your level choice of stereo, bridge-mono and parallel mono.it can connect to the speaker quickly with professional Speakon.
6:- crossover selector function. (only for CA 12, CA 18, CA 20 ) Turn this function ' ON' if you want to use the power amplifier with one or more subwoofer speakers.

QD Audio Power Amplifier MT 4500
4 fan
2 crossover
3 u size

QD Audio Power Amplifiers CA 80
specially for bass speaker AND TOP
4 FAN
2 crossover
3 u size

Four Fan for more efficient cooling

Frequency Response :- 20Ηz-20KHz(+0/_0.3db)

THD+N :-

S/N Ratio :- >95db

Damping factor :- >400

Crosstalk :- >70db@8Ω 1KHz

Input Impedance :-20kΩ( Balance)/10KΩ (Unbalance)

Output Circuitry :- Class 2 step H

Protect :- overheat short circuits, DC , Limit and softstart, Output relay-Zero Current switch, Intellctual clip limiter

Height :- 3U

QD Audio new CA series features faster reaction speed higher of damping factor and great function, higher level protection function , protection technology, special technology of SMD excellent component . 5200,1943 adopts TOSHIBA transistor to supply the high power and steady quality.
CA series have the following Advantages.
1:- This amplifier is noise free. it will increase the quality of work.
2:- It can make less distortion for a better quality sound.
3:- Integrate protect impact function of power soft -start, DC output protect function, longtime over-heat protect function and delay function. This function can protect the circuit faster when the amplifier short circuits and overloads. This will give it a steady performance for a long period of time.
4:- This series amplifier has excellent and natural timber. The adequate power gives very good control for the speaker.
5:- The unit has various input/output connectors it has three ways sensitivity switches for your level choice of stereo, bridge-mono and parallel mono.it can connect to the speaker quickly with professional Speakon.
6:- crossover selector function. (only for CA 12, CA 18, CA 20 ) Turn this function ' ON' if you want to use the power amplifier with one or more subwoofer speakers.

QD Audio Power Amplifier RX 4000
4 FAN
2 CROSSOVER
2 U SIZE

QD Audio Power Amplifier RX 3000
4 FAN
2 CROSSOVER
2 U SIZE

QD AUDIO AMPLIFIER 
MX 4800 4 CH AMPLIFIER 

Professional power amplifiers

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

XTi 4002Two-channel, 1200W @ 4 Power Amplifier Overview Features Specifications
There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
 
Recommended for: Portable PA.

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crowns patented DriveCore technology and can drive 2400W at 4 bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

Specifications:

Rated Power Output775W Stereo (per Channel at 4)Sensitivity.775Vrms or 1.4VrmsFrequency Response+0dB, -1dB (at 1W, 20Hz to 20kHz)Signal to Noise Ratio>103dB (rated as dBr to full rated 8 power output; A-Weighted)Total Harmonic Distortion (THD)< 0.5%Intermodulation Distortion (IMD)=/ < 0.3% (60 Hz and 7 kHz at 4:1 from full rated output to 30 dB)Damping Factor (8ohms), 10 Hz-400 Hz> 200Crosstalk (below rated 8 power)>85 dB at 1 kHz ; >55 dB dB at 20 kHzRated Power Output (W, stereo, per channel at 4)775Sensitivity (V, for full rated power at 4)1.4Signal to Noise Ratio (dB, below rated 1kHz power at 8, A-weighted)>103Input Impedance (K Ohms, balanced)20Input Impedance (K Ohms, unbalanced)10DimensionsHeight (mm)89.0Width (mm)482.6Depth (mm)272Weight (kg)4.9FeaturesPeakx limitersYesForced-air coolingYesXLR inputsYesRCA inputsYes1/4" inputsYesUser selectable input sensitivityYesSpeakon and binding post outputsYesLCD displayYesRemote power triggerYesPureBand Crossover SystemYesDocuments & Downloads

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

The secret to making speakers sound great lies with the crossover you use. With the qd audio 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades ofqd audio knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.

The QD Audio 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.

Features:

• XLR balanced ins and outs
• Mode switches for mono 4-way or stereo 2-way/3-way operation
• Low frequency summed (subwoofer) output
• x10 range switch on both channels
• 40Hz high pass (low cut) filter both channels
• Phase reverse switch on all outputs
• Individual level controls on all outputs
• 24dB per octave Linkwitz-Riley filters (the professional standard)
• Stereo/Mono status LEDs indicate the selected mode
• dbx® 2 year parts and labor as standard
• CSA NRTL/C approved
• CE compliant

Meet the new XLS DriveCore™ 2 Series
The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.
 
Join the social conversation: #BeHeardXLS
 

Features

Class D amp with Crown''''s ultra-efficient DriveCore technology weighs less than 11 lb 

Higher DSP capabilities: More control; has band pass filter per channel 

Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues

Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power

Set sleep mode after specified time without having to press a button

Security setting disables menu buttons; menu locked/unlocked by entering combination

System reset allows factory settings to be restored

Remote power trigger

Peakx™ Limiters provide maximum output while protecting your speakers

XLR, 1/4", RCA inputs provide flexibility

Integrated PureBand™ Crossover System for better performance and control

Efficient forced-air fans prevent excessive thermal buildup 

Meet the new XLS DriveCore™ 2 Series
The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

Features:

Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb 

Higher DSP capabilities: More control; has band pass filter per channel 

Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues

Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power

Set sleep mode after specified time without having to press a button

Security setting disables menu buttons; menu locked/unlocked by entering combination

System reset allows factory settings to be restored

Remote power trigger

Peakx™ Limiters provide maximum output while protecting your speakers

XLR, 1/4", RCA inputs provide flexibility

Integrated PureBand™ Crossover System for better performance and control

Efficient forced-air fans prevent excessive thermal buildup 

We are offering JBL Libra 250 Watt P A Amplifier to our clients.

• 4-channel output: stereo line output for the mix, stereo headphone output for previewing tracks
• Microphone input: input with talk-over function
• No need to carry an audio interface

• Same size as DJ Console Rmx: 35x25cm (13.7x9.8")
• Large for mixing, compact enough for mobile use
• Lightweight: < 2 kg/4.4 lbs
• USB bus-powered: no need for a power plug

• Touch detection activated by weight of user’s hand
• Large: 12cm (4.7") diameter/1.5cm (0.6") height

• 2-deck controls + 2 deck switches convert deck A into C, and deck B into D => control 4 virtual decks
• Deck switches convert all deck controls into another set of MIDI commands, + mixer volume and EQ controls
• Deck viewers: lights up the letter of the controlled deck
• Backlighting color of jog wheels changes, to indicate which virtual deck is being controlled

• Comfortable mixing
• Well-spaced controls
• Large, non-slip feet

• VirtualDJ 7 LE DJC

• USB bus-powered controller
• 2 decks + mixer controls
• 4-channel out (stereo out for mix + stereo out for preview) / 1-channel in (microphone)
• Drivers
• MIDI control in Mac OS/Windows
• Audio drivers:
• Core Audio® (Mac OS)
• WDM/ASIO (Windows)

• 1GB RAM
• CD- or DVD-ROM drive
• Powered USB port
• 100MB hard drive space
• Internet access (for software or driver updates)

• 1.5GHz CPU (Atom®, Core Duo®, Athlon®)

• 1.5GHz Core Duo® CPU

2ch power amplifier